Skip to main content
All news

Risk Management ·

PARM: what the Annual Risk Management Plan must contain and how to draft it

The Annual Risk Management Plan (Piano Annuale di Risk Management, PARM) is the document with which a healthcare organisation plans objectives, actions and indicators for patient safety. In this guide we look at its legal basis, the sections it cannot do without, how to draft it from the organisation's real data and which mistakes to avoid — with a method that applies both to public healthcare trusts and to accredited private providers.

By Fabio Vantaggiato, CEO & Co-Founder

What the PARM is and what its legal basis is

The Annual Risk Management Plan — abbreviated to PARM in Italian, and in some Regions also called the Piano Annuale per la Gestione del Rischio Sanitario (Annual Plan for Healthcare Risk Management) — is the planning document with which the risk management function of a healthcare organisation sets out, for the following year, which risks it intends to address, with which actions, which responsibilities and which monitoring indicators. It is not a retrospective report: it is a planning tool, which closes with a review of results and reopens the cycle for the following year.

The national legal basis is Law no. 208 of 28 December 2015 (the 2016 Stability Law), which in Article 1, paragraphs 538-540, required all public and private providers to establish a function for monitoring, preventing and managing healthcare risk. Law no. 24 of 8 March 2017 (Gelli-Bianco) then made patient safety an integral part of the right to health (Art. 1) and built the entire framework of healthcare liability around the risk management function — a framework that is now fully enforceable, as the law has been fully in force since 16 March 2026 together with its implementing decrees, including Ministerial Decree (D.M.) 232/2023 on insurance.

The PARM as a document with this name is not required by national law: it is the main regional regulations — through their own resolutions and guidelines — that require its formal adoption, often linking it to accreditation requirements and to obligations towards the Regional Centres for Healthcare Risk Management provided for in Art. 2 of the Gelli-Bianco Law. In practice, however, the PARM has become the de facto standard everywhere: it is the document that shows that the function required under paragraphs 538-540 does not exist only on the organisation chart, but plans, acts and measures. For the overall picture of obligations and methodologies, see our complete guide to clinical risk in healthcare.

The standard structure of the document, section by section

There is no single national format, but well-constructed PARMs converge on a recurring structure. If your Region provides a template, follow it; otherwise, the six sections below cover what an assessor — or a judge — expects to find.

1. Analysis of the context and of the previous year's data

This is the section that distinguishes a real plan from a box-ticking exercise. Here the organisation takes a snapshot of itself: volumes and types of activity, the set-up of the risk management function and, above all, the safety data for the year just closed — incident reports (near misses, adverse events, sentinel events), claims opened and closed, sentinel events submitted through the SIMES information flow (Ministerial Decree of 11 December 2009), complaints, the results of clinical audits and Safety Walkarounds, and the status of implementation of the Ministry of Health's Recommendations for patient safety (nos. 1-19). Every objective in the following sections should be traceable back to a data point in this section.

2. Objectives for the reference year

Few, justified and measurable. A well-written PARM objective specifies the expected result, the scope and the criterion by which, at year end, it will be judged to have been achieved or not. "Improving the safety culture" is not an objective: it is an aspiration. "Extending the single reporting form to all clinical units by the third quarter" is.

3. Risk prioritisation matrix

The risks identified by the context analysis must be ranked using an explicit criterion, typically a probability by impact matrix, possibly adjusted for detectability (as in the FMEA/FMECA approach). The matrix serves to justify the choices: why this year the work focuses on falls and medication safety and not on something else. It makes the plan defensible before management, the Region and, if necessary, in court.

4. Actions and responsibilities

For each objective: which actions, who is accountable for them (by name or by role), with which resources and by which deadlines. An action without an owner is an action that will not be carried out. It is good practice to distinguish genuine improvement actions from the function's ongoing activities (managing reports, audits, reporting to the Regional Centre).

5. Monitoring indicators

Every action has at least one indicator, with the data source, baseline, target value and frequency of measurement. Indicators are what make in-year follow-up and the year-end report possible: if an indicator cannot be fed with the data the organisation actually collects, the indicator must change — or the way the data are collected must change.

6. Training plan

Clinical risk training is an integral part of the PARM, not a separate document: target audiences, content (incident reporting, Ministry of Health Recommendations, analysis methodologies), delivery methods and attendance tracking. Documented training is among the first pieces of evidence requested during an inspection.

How to draft it in practice: people, data, mistakes to avoid

Who to involve

The PARM is signed by the risk manager, but it cannot be written by the risk manager alone. The typical working group involves:

  • Medical directorate and general management: they approve the plan and guarantee its resources — without their commitment the PARM remains on paper;
  • Quality and accreditation office: aligns the plan with accreditation requirements and with the management systems already in place;
  • Patient safety leads in the clinical units: they bring knowledge of real processes and become the natural owners of the actions;
  • Legal office and claims management (the Claims Assessment Committee, where established): they read litigation as a source of priorities;
  • Pharmacy, nursing office, clinical engineering: they oversee high-risk areas such as medication, falls and medical devices;
  • RSPP (Health and Safety Manager) and DPO, for the points of contact with occupational health and safety and data protection.

Which data sources to start from

The quality of the PARM is the quality of its sources. The main ones are:

  • the incident reporting database: the distribution of reports by type, area and severity and, above all, the results of the analyses (RCA, clinical audits, M&M reviews);
  • the SIMES information flow: sentinel events and claims notified to the Ministry of Health;
  • the claims register and the assessments of the Claims Assessment Committee;
  • complaints and reports to the Public Relations Office (URP), satisfaction surveys, safety culture questionnaires;
  • the results of FMEA/FMECA conducted on critical processes and of Safety Walkarounds;
  • the status of implementation of the Ministry of Health Recommendations and the year-end report on the previous PARM.

The most common mistakes

  • Copying and pasting last year's plan. This is the most frequent mistake and the most visible: if the context analysis does not change while the organisation's data do, the plan loses credibility in the eyes of anyone who compares it with the real data flows — the Region included;
  • Unmeasurable objectives. Without a verification criterion, at year end it is impossible to say whether the objective has been achieved: the year-end report becomes a rhetorical exercise and the improvement cycle breaks down;
  • No in-year follow-up. A PARM approved in January and reopened in December is a plan that has failed from the start. At least one formal interim review of the indicators is needed, with the option of recalibrating actions and deadlines;
  • Too many objectives. Ten priorities amount to no priorities: better a few lines of action backed by real resources;
  • A plan owned by the risk manager alone. If clinical units do not recognise themselves in the actions, they will not carry them out.

The link with incident reporting and FMEA: data feed the plan

The PARM is not a stand-alone document: it is the point where the two engines of risk management converge, the reactive one and the proactive one.

The reactive engine is incident reporting: near misses, adverse events and sentinel events reported during the year, with the related root cause analyses (RCA) and clinical risk audits. This is where weak signals emerge — recurring near misses at the same stage of a process — which the prioritisation matrix turns into objectives. It is worth remembering that Art. 16 of the Gelli-Bianco Law protects this circuit: the minutes and records of clinical risk audits cannot be used in legal proceedings, precisely to allow honest, non-defensive analysis.

The proactive engine is FMEA/FMECA: failure mode analysis conducted on critical processes before an event occurs. The processes with the highest risk priority number are natural candidates for PARM actions, and the mitigation actions identified by the analysis become the plan's actions, already backed by a documented rationale.

Once the year has closed, the cycle is reversed: the PARM indicators feed the annual clinical risk report and the context analysis for the next plan. If this cycle — reporting, analysis, planning, review — lives on disconnected spreadsheets, reconstructing it after the fact is the most onerous task the function faces.

How EasyRisk supports PARM reporting

EasyRisk is Easy Health's clinical risk management platform, and the PARM is one of its core modules. The single risk register, incident reports with their analysis and closure workflow, claims and complaints all live in the same environment: the context analysis is built by querying data that are already structured rather than chasing spreadsheets, the prioritisation matrix is updated with the register's probability and impact ratings, and the plan's actions are assigned to owners with deadlines and tracked progress — making in-year follow-up a natural step. At year end, the annual report is generated by aggregating the data collected, consistent by design with the plan that preceded it.

If you are considering how to digitise this cycle, we have written a guide to choosing healthcare risk management software, with the criteria to include in your tender specifications.

Need to draft your organisation's PARM?

The Easy Health team supports medical directorates and risk managers in building the data-plan-review cycle, with software and specialist consultancy.

Discover the EasyRisk platform or contact us to arrange a dedicated call.

Would you like to find out more?

Get in touch to find out how our solutions can support your healthcare organisation.

Talk to an expert

Talk to us

Tell us how care is organised in your area: we'll prepare a demo on your own pathways, not on a textbook case.

PARM: what the Annual Risk Management Plan must contain and how to draft it | Easy Health